The newest AGESA ComboAM5PI 1.0.0.4 firmware from AMD is allegedly causing performance problems for some Ryzen 5 7600X processors. The report comes to us courtesy of chi11eddog who suggests that the firmware is disabling Core0 on dual-CCD versions of the Ryzen 5 7600X causing boot failure. Fortunately, the issue only plagues chips with AGESA 1.0.0.4.
For the uninitiated, the AMD Generic Encapsulated Software Architecture (AGESA) initializes memory, processor cores, chipset, etc., and is a part of the Basic Input-Output System (BIOS).
While technically the Ryzen 5 7600X processor doesn’t need multiple CCDs, Ryzen 5 7600X processors can have dual CCDs, as AMD bins down silicon that doesn’t meet performance/quality requirements for high-end Ryzen chips to lower-end Ryzen 5 and Ryzen 7 CPUs. This is done to extract as many usable processors from a single wafer as possible.
While we don’t have any official explanation as to why some dual-CCD Ryzen 5 7600X parts are affected Tom’s Hardware postulates that the AGESA 1.0.0.4 firmware might be having trouble distinguishing single-CCD Ryzen 5 7600X CPUs from the dual-CCD ones causing it to disable Core0. At the time of writing, MSI and ASRock have pulled down the firmware from their website for their X670 and B650 boards. Gigabyte has not yet followed suit.
If you have, unfortunately, installed the firmware, update the BIOS of your motherboard to a newer version if it is available. Otherwise, you can also try downgrading the BIOS to an earlier version.
Buy the AMD Ryzen 5 7600X on Amazon
I am Fawad, a fellow tech nerd. As a tech junkie, my relationship with technology goes back to my childhood years. Getting my first Intel Pentium 4 PC was the start of the journey that would eventually bring me to Notebookcheck. Finally, I have been writing for tech media since 2018. From small no-name projects to industry leaders, I have worked with a number of tech publications.
.